How to Clean Mold in Shower Grout Naturally
Table of Contents
If you’ve recently discovered fungus growing in your shower grout then you may want to clean it using a commercial cleaner. Most of these cleaners come in a handy spray bottle that you can spray directly onto the moldy area and let it sit for a certain amount of time, based on the manufacturers’ recommendations. You should ensure to wear some type of protective gear when you use these cleaners and always remove any moldy areas before re-applying the cleaner. If the mold problem persists, you may want to hire a professional cleaner or change your grout.
How to Remove Mold from Tile Grout
If you’ve got mold growing on the shower tile grout, you can use baking soda to eliminate the fungus. This mild abrasive substance can be applied directly to the affected area with a brush, I use an old toothbrush, but it can also be mixed with water to make a paste that you can apply to the grout. This combination will make the mold spores loosen and fall off.
You can also mix baking soda with water and apply the mixture to the affected area. After the mixture dries, scrub the mold-infested area with a soft brush. You can repeat this process if necessary. After about thirty minutes, rinse off the solution with warm water.
Hydrogen peroxide is a common ingredient in heavy-duty mold abatement products. However, you should be a bit careful with this bleach because it can discolor your tub and walls if you accidentally splash it around. You can also try this method if you notice that your grout is discolored.
Hydrogen peroxide is a mild form of bleach that can be used to clean mold and mildew from colored tile and grout. However, you must make sure you store the hydrogen peroxide in a dark container, as it will lose its effectiveness if exposed to light. You should also make sure to clean your tiles and grout thoroughly after applying this solution.
To apply this bleach, you will need to make a thick paste of baking soda and hydrogen peroxide. After mixing the two, apply them to the affected area. Let it sit for about 5 minutes, and then use a stiff brush to scrub the paste. Then, rinse it off with water. Repeat this process as necessary.
Tea tree oil
There are many different ways to clean your shower grout, and one of the easiest is by using tea tree oil. It is an excellent disinfectant, and it works really well to remove mold naturally without damaging the grout. The only downside is that tea tree oil is highly abrasive when used in a neat form and may irritate your skin so I would wear rubber gloves. Use a spray bottle with a few drops of tea tree oil, and spray the affected area. Allow the mixture to sit for a couple of hours, and then wipe it off with a soft cloth.
Mixing a few drops of tea tree oil with a cup of water is another easy way to get rid of mold. To use the solution, you’ll want to mix it well before using it. Once the mixture is combined, just spray it directly on the contaminated area. Once it has sat for a few hours, you can wipe off the excess with a clean rag.
To clean mold from shower grout, you can use borax. However, it’s important to dilute it with water first. To create a paste, mix about half a cup of borax with a gallon of warm water. Apply the mixture to the moldy grout with a stiff scrubbing brush, and wear goggles to prevent any accidental splashes. It’s important to check your progress frequently.
Another way to get rid of mold is to use a borax mold spray. Borax is a strong natural antifungal and can kill the spores of mold. You can apply the solution to the mold-affected area with a sponge, scrub brush, or rag. You can repeat the process if necessary. This method will kill the spores and will help prevent new mold spores from growing.
Vinegar is an excellent multi-purpose cleaner that can help you get rid of mold from shower grout naturally. The acidity in vinegar can help break down the buildup of soap scum and kill any mold. When mixed with baking soda, the mixture will create a foam that will agitate the mold and remove it. This will remove the mold, but it may stain light-colored grout.
It is important to wear protective gloves while using vinegar, as it can be harmful to your health when used in strong doses. In addition, white vinegar is not safe for people with health conditions due to its strong fumes, so you need to be extra careful and wear safety gear. If you’re allergic to mold, you should avoid cleaning your shower grout with vinegar. Nevertheless, you can spray the solution on the mold and let it sit for about an hour. Then, rinse the area with warm water.
A mixture of baking soda and water can be used to clean mold from shower grout. You can also add essential oils for a better smell and added cleaning power. Use an old toothbrush to clean the small grout lines. Then after cleaning the grout, use a rag to wipe it down.