How to Clean a Bathroom like a Professional

There is a lot going on in the bathroom. They get easily soiled and so therefore it is vital that you know how to clean a bathroom so that it is not only comfortable for family and guests but also prevents germs and airborne disease from spreading.

Cleaning the Bathtub

One thing to keep in mind is that how you clean your tub is dependent on the material it is made of. The best thing you can do is follow the instructions provided by the manufacturer and add it to your cleaning checklist.

Enamel-Enameled Porcelain Steel

Never work with abrasive materials. To avoid pitting and staining, keep all soaps, shampoos, and supplies in special containers that can be hung from the shower or stuck to the tile.

Make your own cleaner by combining one gallon of hot water and two tablespoons of dishwashing liquid. Spray onto the surface to clean and scrub with a soft cloth, then rinse thoroughly and buff dry with another soft cloth.

If you have rust stains, you can remove them with muriatic acid (available at pool supply stores). If you’re going to do this, make sure you’re wearing protective gear. In a cup, combine 4 ounces of room-temperature water and 4 ounces of muriatic acid. Dip a cloth into the solution and rub it across the stain, pressing down as you go. Rinse and repeat until the stain has been removed.

Acrylic

Never use an abrasive cleaner because it will scratch the surface. It can also be harmed by various chemicals that are said to be used for bathroom cleaning. Generic baby shampoo is an excellent cleaner to use. Apply it directly to the surface with a soft cloth and rub it in circles. When you’re finished, rinse the surface. Using a dry cloth, buff the surface dry. To keep the tub clean, apply car wax to the surface and buff it out, just like you would on your car. Allow hardening overnight.

Fiberglass

Cleaning fiberglass, one of the less durable materials but very popular due to its low cost, can be difficult. However, do not use an abrasive cleaner. To make a paste, combine hot soapy water and baking soda. With a soft sponge, scrub all over your tub. You want the solution to adhere to the tub’s walls and sides. Allow for 30 minutes before vigorously scrubbing with the sponge until it is removed. Rinse with cold water and dry with a soft cloth or paper towel. It is acceptable to use a magic eraser on difficult-to-clean areas.

Cast Iron Enamel

This is one of the more long-lasting tub materials. It is more expensive, but it typically lasts much longer. Make a paste with the same baking soda and soapy water mixture as before, but this time rinse with warm water. Scrub with a rag or sponge, but avoid using steel wool on the surface. If there are stains on the surface, make a solution of trisodium phosphate and hot water (follow the directions) and apply it to the stain, then rinse thoroughly.
To bring out a clean shine, dry the surface as usual.

How to Deep Clean a Bathroom

Clean a Bathroom Shower Door

Instead of a curtain to enclose your shower tub, you may have stained doors that require a thorough cleaning. To clean, you can use any of the above-mentioned mixtures (but only one at a time). Simply apply the solution to the affected area and scrub with a stainless steel pad if the door is made of glass. If it’s plastic, use a softer brush and milder vinegar and dish soap mixture. Rinse, scrub, and repeat. After cleaning, pat dry with a soft, dry towel to bring out the shine.

Depending on the materials, cleaning your bathroom will be easier or more difficult. All of the materials mentioned can be used to cover your tub, sink, and toilet. For the best results, use the appropriate cleaning solutions for the material and stain.

Get Mold off Your Bathroom Ceiling

If you already have mold on your ceiling, there is nothing you can do to prevent further growth until you have cleaned what is already there. A simple solution of warm water and detergent, or a homemade cleaning solution of diluted bleach or white vinegar, is the best way to remove mold from bathroom ceilings.
Wear a protective mask and gloves before beginning to clean the area to avoid touching or inhaling mold spores. Allow the area to dry after washing it with mild detergent and warm water.

The procedure is slightly different if you’re using diluted bleach or white vinegar to remove the mold. To use the bleach solution, combine one part bleach and one part water and apply them with a cloth. Pour the vinegar into a spray bottle and spray it directly on the mold. Allow it to sit for an hour or so before wiping it clean with water and allowing it to dry.

Prevent the recurrence of bathroom ceiling mold.

Include ventilation.
Ventilation can be a major issue in bathrooms, particularly those without windows, but installing a ventilation fan can often reduce mold and mildew buildup. Most bathrooms now have extractor fans to remove warm and moist air, but if this isn’t an option for you, you can increase ventilation in your bathroom by opening windows and doors.
Ventilation fans will remove odors and other contaminants while maintaining high air quality and, as a result, limiting bacteria growth.

Anti-molding paint.

Anti-mould paint is a specially formulated type of wall and ceiling paint that prevents mold from growing, even in areas with high humidity and condensation. It can be a good first step in preventing mold from returning after you’ve cleaned it away, as it creates a surface that repels condensation. Different brands of anti-mold paint provide varying levels of protection, but they typically last 5-6 years.
However, because anti-mold paint isn’t waterproof, you could still end up with water damage to your ceiling if it gets consistently wet.

Utilize ceiling cladding.

Ceiling cladding is an excellent way to keep mold from growing on your bathroom ceiling. It’s becoming a more popular option, particularly in rented housing or hotels, because it’s simple to install and stylish addition. Unlike a plastered ceiling, which can absorb steam, PVC cladding will not absorb steam and thus will not become moldy.
Bathroom ceiling cladding can also be used over anti-mold paint to provide twice the level of protection. By combining both methods of mold prevention, you will make your ceiling more resistant to mold build-up by keeping it dry. These are the best ways how to clean a bathroom ceiling

Conclusion:

So we have looked very briefly at how to clean a bathroom.

If you need to know how to clean a bathroom step-by-step then contact us and we will send you our how-to-clean bathroom checklist, you’ll love it!